Marantz M-CR502 - Manual (Page 29)

25
NAMES AND FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADV
ANCED OP-
ERA
TIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
ADV
ANCED
OPERA
TIONS
ENGLISH
RT (RADIO TEXT)
1. 2. 4. 6. 3. 5. 7.
2. 4. 6.
3. 5. 7.
1.
1.
Press the MODE button on the front panel
for 3 or more seconds or the SET UP
button on the remote controller while in FM
mode.
2.
Press the 1/2 buttons on the front panel
or the VOLUME button on the remote
controller to select “RDS.”
3.
Press the ENTER button to select the RDS
function.
4.
Press the 1/2 button on the front panel
or the VOLUME button on the remote
controller to display “RT ON/OFF.”
5.
Press the ENTER button to set RT ON/ OFF
mode.
6.
Press the 1/2 button on the front panel
or the VOLUME button on the remote
controller to select “RT ON” or “RT OFF.”
7.
Repress the ENTER button to set whether
to enable or disable the RADIO TEXT
function.
• If no text data is being broadcast, “NO
TEXT DATA” is displayed.
ADVANCED OPERATIONS
CT (CLOCK TIME)
• You can set the clock time automatically from
an RDS station broadcasting Clock Time (CT)
information.
If “CT ON” is set, the unit automatically sets its
clock to match the Clock Time information being
received.
1. 2. 4. 6. 3. 5. 7.
2. 4. 6.
3. 5. 7.
1.
1.
Press the MODE button on the front panel
for 3 or more seconds or the SET UP
button on the remote controller while in FM
mode.
2.
Press the 1/2 button on the front panel
or the VOLUME button on the remote
controller to select “RDS”.
3.
Press the ENTER button to select the RDS
function.
4.
Press the 1/2 buttons on the front panel
or the VOLUME button on the remote
controller to display “CT ON/OFF.”
5.
Press the ENTER button to set CT ON/ OFF
mode.
6.
Press the 1/2 buttons on the front panel
or the VOLUME button on the remote
controller to select “CT ON” or “CT OFF.”
7.
Repress the ENTER button to set whether to
enable or disable the Clock Time function.
• If you live close to the border with another
country, Clock Time information may be
received from a radio station in another
time zone.
• In this case you should select “CT OFF.”
• In this mode, “CT” data is received, but
the time on the unit is not changed.
M-CR502N_01_ENG.indd 25 08.8.7 5:28:49 PM