Marantz M-CR502 - Manual (Page 15)

11
NAMES AND FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERA
TIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADV
ANCED
OPERA
TIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
BASIC
OPERA
TIONS
ENGLISH
BASIC OPERATIONS
SETTING POWER TO ON/STANDBY
Before turning on the power, check again that all
speaker and antenna connections have been made
correctly.
Turn the power on by pressing the ON/STANDBY
button on the unit.
Turn the power on by pressing the POWER button
on the remote controller.
When the power is turned on, the input source last
used is displayed on the display panel.
If the power is set to standby mode, the display
panel displays the time.
• The display flashes “00:00” at time of purchase.
Be sure to set the time. (See page 15)
LISTENING TO A CD
The unit can also play MP3 and WMA music data
files written on a CD-R or CD-RW disc in ISO9660
Mode 1 or Mode 2 CD-ROM format.
Be sure to adjust the audio volume level of the unit
before listening to a CD.
1. 2. 3. 4. 5. 6. 1. 2. 3. 4. 5. 6.
2. 3.
1.
5.
6.
4. 5.
2. 3.
1.
5.
6.
4. 5.
1.
Select CD as the input source by pressing
the INPUT button on the unit or the CD
button on the remote controller.
Note:
When changing the input source to CD using the
INPUT button on the unit, be sure to put the remote
controller into CD/USB mode by pressing its CD
button.
2. Open the disc tray by pressing the 0 button
and then place the CD on the disc tray.
Make sure that the printed label is facing up
when placing the CD on the tray.
3. Close the disc tray by pressing the 0 button
again.
• A display like that given below appears on
the display panel after disc information
has been read.
PLAYING A CD
4. Start playing the CD by pressing the 6
button on the unit or the 2 button on the
remote controller.
• Adjust the volume to your taste when
playback starts using the volume buttons
on the unit or remote controller.
• Play the CD by pressing the 6 button
on the unit; or the 2 button, RANDOM
button, or any of the numeric buttons on
the remote controller while the disc tray
is closed.
PAUSING PLAYBACK
5.
Pause playback by pressing the 6 button
on the unit or the 8 button on the remote
controller during playback.
• Resume playback by again repressing
the 6 button on the unit or the 2 button
or the 8 button on the remote controller.
STOPPING PLAYBACK
6.
Stop playback by pressing the 7 button on
the unit or remote controller.
M-CR502N_01_ENG.indd 11 08.8.7 5:28:17 PM