Nortec ME Control Installation - Manual (Page 32)

32 Installation
4.4.6 Mounting the control unit
Important: if multiple systems have been supplied to a site, ensure that the serial number on the control
panel corresponds to the serial number marked on the evaporative module.
Fig. 19: Mounting the control unit of Nortec ME Controls
Mounting procedure:
1. Mark the attachment points for the upper and lower wall support at the desired position with the help
of a level.
2. Fix the wall supports to the wall using appropriate fixings. Before tightening the fixings adjust the
wall supports horizontally using a level.
4. Unlock the screw of the front panel of the control unit, then remove the front panel.
5. Hang up the control unit onto the wall support and secure using the two M6 bolts in the top corners
of the control unit.
6. Reattach the front panel and secure it with the screw.
210
52.5
52.5
(8.3
")
(2.1
")
(2.1
")
315
(12.4
")
64.5 (2.5
")
450 (17.7
")
300 (1
1.8
")