D-Link DI-1162 - Manual (Page 100)

DI-1162 Remote Access Router
90 Configuration and Management
In the example for the game Diablo shown in the above screen, if a
packet is sent out on the TCP port number 6112 (a request by a local
user to a Diablo server on the Internet to join a group game), all
incoming packets on the UDP port 6112 (game data) will not be
translated by NAPT.
Please keep in mind that the user will always initiate use of the special
application. Thus, the first entry should always have the Connection
Type of Outgoing Control. Also, since the defined port number or
range of port numbers will be mapped to the user who triggered the
outgoing control, all incoming data will be sent to that user.
Consequently, only one user can use the special application at a time.
Telnet/Discovery Enable
Telnet State - This feature enables or disables the router’s ability to be
configured over the LAN using telnet.
Discovery Function – Enabling this feature allows the router to be
auto-discovered by D-Link SNMP management software and the
included Windows-based configuration software called RouterView.