Dhcp server configuration, Dynamic ip pool – D-Link DI-1162 User Manual
Page 72
Advertising
DI-1162 Remote Access Router
62
Configuration and Management
DHCP Server Configuration
When acting as a DHCP server, the DI-1162 will manage many of the
IP network parameters. The DI-1162 will never assign a broadcast or
network IP addresses to hosts, even if such an address is included in the
specified range.
Please note that the router can act either as a DHCP Server or a DHCP
Agent, but not both at the same time.
Dynamic IP Pool
The dynamic IP pool screen shown below contains the parameters that
the router can set on the hosts.
Advertising