D-Link DI-1162 - Manual (Page 123)

DI-1162 Remote Access Router
Configuration and Management 113
♦
Interface – The WAN interface to be tested.
♦
Phone Number – The phone number that will be dialed by the
WAN Interface. Please ensure that a modem answers the phone on
the other end.
♦
Baud Rate – The rate of data transmission. The answering modem
must be capable of operating at the baud rate defined here.
♦
Connection Test – Press <Enter> to begin the test. The router will
dial the phone number defined above, try to establish a valid link
with the answering WAN device and hang up.
♦
Dial Out – Press <Enter> to begin the test. The router will dial the
phone number above and negotiate a connection with the
answering device.
♦
Hang up – Press <Enter> to hang up after Dialing Out.