D-Link DI-1162 - Manual (Page 22)

DI-1162 Remote Access Router
12 Installation
If it is connected to another NWay capable port, the two ports will
configure themselves to attain the best connection possible.
•
Fan
Provides ventilation inside the router. Please ensure to leave
adequate space at the rear and sides of the unit for proper
ventilation.
•
Power Socket
A standard 100~240V socket for the power cord.
•
Power Switch
A rocker switch that turns the router off and on.
Site Installation
The site where you install the DI-1162 Router may greatly affect its
performance. Please follow these guidelines for setting up the router.
♦
Install the router on a sturdy, level surface that can support at
least 2 kg of weight. Do not place heavy objects on the router.
♦
The power outlet should be within 1.82 meters (6 feet) of the
router.
♦
Visually inspect the power adapter cord and see that it is fully
secured to the power socket.
♦
Make sure that there is proper heat dissipation from and
adequate ventilation around the router. Leave at least 10 cm of
space at the side and rear of the router for ventilation.
♦
Install the router in a fairly cool and dry place. See Appendix B
for the acceptable temperature and humidity operating ranges.