D-Link DI-1162 - Manual (Page 157)

DI-1162 Remote Access Router
Appendix E – Configuration File 147
Appendix E – Configuration File
The router can be configured when performing a Software Update
through a configuration file.
The configuration file can hold many settings for the router including
IP Addresses for all ports, path to the boot server, and various port
settings.
The configuration file is very useful if you wish to update your
software and keep all or most of your settings the same.
The configuration file should be saved with the extension .SYS in the
same directory as the runtime image file (software update file).
An example configuration file is shown below. Please note that:
# : Comment. This line describes the actual configuration in
the next line. You can also use this feature to mask items
you don’t need to be configured (rather than deleting
them).
Format: Keyword <Space> Parameter. For example the very
last line:
ip-stat disable
ip-stat is the keyword as explained in the # (comment)
line above as meaning IP routing statistics.
disable is the parameter you set.