D-Link DI-1162 - Manual (Page 120)

DI-1162 Remote Access Router
110 Configuration and Management
The parameters are described as follows:
♦
Code – A special code for categorizing events. Some codes
include:
•
0 Cold Start
•
1 Link Change
•
2 Tx Abort
•
3 Rx Abort
•
4 Connect/Disconnect
•
5 NAT Request
•
6 DHCP Request
♦
Port – The interface on which an event occurs.
♦
Time – Tick-times denoting when events occurred.
♦
Data – Data that helps technical support personnel evaluate the
event.