D-Link DI-1162 - Manual (Page 28)

DI-1162 Remote Access Router
18 Installation
♦
Choose Exit in the sub-menus to return to the Main Menu.
2. Enable IP Networking
♦
Choose Network Configuration, IP
Configuration.
♦
Position the cursor over the last item IP Networking
and press <space bar> to Enable it .
♦
Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
3. Assign an IP address to the LAN port in the Network
Configuration sub-menu of the Main Menu.
♦
Still in Network Configuration, IP
Configuration submenu from Step 2 above, choose IP
Stack Configuration, LAN 1.
♦
Enter a valid IP address for the LAN in the first item. You may
also enter a Netmask if you wish. For more information about IP
Addresses and Subnet masks, please refer to Appendix C – IP
Concepts.
♦
Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
♦
Choose Exit in the sub-menus to return to the Main Menu
The router can now be accessed via the LAN by Telnet, the Windows-
based DI-1162 Router Configuration Utility (included with the router)
and other SNMP management applications.