D-Link DI-1162 - Manual (Page 32)

DI-1162 Remote Access Router
22 Installation
♦
Choose WAN1
♦
Please refer to the Configuration and Management section of
this manual for more detailed information regarding the items
in this screen.
♦
Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
5. Define and configure dial-in users who may access the router and
the LAN it is connected to (if applicable).
♦
From the Main Menu choose Advanced Functions ,
Remote Access Configuration, Dial-In User
Profile and press <Enter> in the first empty field.
♦
Enter the dial-in user’s Username (might not be their real
name) and Password.
♦
Change the State to Enable .
♦
Please refer to the Configuration and Management section of
this manual for more detailed information regarding the items
in this screen.
♦
Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
The WAN port is now setup to receive calls from that user. At this
point, you may wish to define other users who will dial-in to the
router. Please note that User Profiles for dial-in users are valid for
any WAN port configured to receive calls.
6. Define a WAN port for dialing out.