D-Link DI-1162 - Manual (Page 41)

DI-1162 Remote Access Router
Configuration and Management 31
LAN Sub-menu
The parameters are described below:
•
Description – this is a user-defined, 32-character identifier used to
name the LAN.
•
Operation Mode – The LAN port is automatically set to Auto-
Negotiation (NWay). When connected to another LAN port,
NWay will configure this port to match the settings of the other
LAN port. If the other port also implements NWay, the two ports
will auto-negotiate the best possible settings achievable by both
ports.
•
State – this is a toggle, to disable or enable the LAN interface.