D-Link DI-1162 - Manual (Page 84)

DI-1162 Remote Access Router
74 Configuration and Management
The parameters are described below:
•
IP Address – this is a network IP address, access point, to a
separate, physical network, on the LAN.
•
Routing Protocol – this is the same as in the Network
Configuration section. Keep in mind that these exchanges are
made with adjacent routers on the LAN, if present.
•
IP Multicasting – this enables/disables IP multicasting on the IP
network you are defining.
All other parameters (Netmask, Routing Mode, Multicast Protocol
and IGMP Version) are identical to those in the Network
Configuration section.
Static ARP
This special function is intended to speed up the process of finding a
host's Ethernet (MAC) address from its network address, and provides
a special condition – any other host acting as an impostor by using the
same IP address as the legitimate host, will be ignored by this router.