QuickLabel CU-30 - Manual (Page 15)

11
Cutter-stacker adjustments and tag stock
Tag stock can vary significantly in size, length, and weight. Conse-
quently, certain types of stock may require adjustments in order to
stack properly:
• As tags are printed and the tag stock is drawn more from
the center of the media supply roll, the tag stock may
have a tendency to curl.
The longer the tag stock, the greater the tendency to curl
as the stock is drawn from the supply roll. If the tag stock
becomes curled, stacking problems can result.
If necessary, slightly lower the angle of the stacking tray
to compensate for the curl of the stock. Turn the tray-
angle adjustment knob clockwise to lower the tray.
long tag stock
may curl
lower the angle of the
stacking tray if curling
becomes a problem