QuickLabel CU-30 - Manual (Page 21)

17
Replacing the cutter blade
The functional life of the cutter blade used in the CU-30 Cutter and
CS-40/CTS-45 Cutter-Stacker is specified at one million cuts. To
ensure proper operation of the cutter unit, cutter blades that have
become dull must be periodically replaced. The frequency with which
the cutter blade must be replaced is determined by how much the
cutter unit is used and by the application in which the unit is used.
NOTE
The CU-30 Cutter and CS-40/CTS-45 Cutter-Stacker were not
designed to cut labels with adhesive backing. The adhesive will
build up in the cut blade and quickly dull the edge.
WARNING
Always shut off and unplug the cutter unit before performing any
step of the cutter-blade assembly replacement procedure. Never
disassemble the cutter unit or expose the cutter blade without
ensuring that the unit has been shut off and unplugged.