QuickLabel CU-30 - Manual (Page 16)

12
• If heavy tag stock is used and tags accumulate in the
stacking tray, the weight of the stacked tags may cause
problems.
The weight may cause tags to press against the stacker’s
drive belts resulting in marred tags. The weight may also
cause the drive belts to slip or stop.
If necessary, lower the angle of the stacking tray to
compensate for the weight of the stock. Turn the tray-
angle adjustment knob clockwise to lower the tray.
• When printing tags that are wider than 4 5 /
8
inches (117.5
mm), remove the adjustable tray guide.
• Five-inch (127-mm) wide tags must have a minimum
length of 2 1 ⁄
2
inches (63.5 mm).