QuickLabel CU-30 - Manual (Page 19)

15
insert two fuses for
European configuration
insert one fuse for
American configuration
4 Replace the fuse(s). At 115V, one fuse is required,
inserted in the right side of the fuse block. At 230V,
two fuses are required, inserted on both sides of
the fuse block. Refer to the screening on the unit
for the proper fuse rating.
WARNING
For continued protection against the risk of fire, replace fuses
only with fuses of the same type and rating.
5 Slide the fuse block back into the fuse/voltage
selection box.
6 Close the cover to the fuse/voltage selection box.
North American (115VAC) European (230VAC)