Rena T-350 - Manual (Page 18)

ASSEMBLY
Connecting Power
1. The T-350 is manufactured for use on a specific
AC voltage source. Before connecting the
power cord to the tabber; verify that you are
connecting the unit to a compatible AC voltage
source. See serial tag for the voltage rating of
your unit.
Serial Tag
Power Switch
Power Cord
2. Verify that the T-350’s power switch is in the
off (0) position.
3. Plug the power cord, supplied, into the power
receptacle; as shown.
4. Plug the other end of the power cord into the
wall outlet.
5. To protect the unit from possible power line
surges or spikes; it is recommended that you
attach the tabber to suitable surge/spike
protector.
CAUTION
DO NOT USE AN ADAPTER PLUG OR EXTENSION CORD TO CONNECT
THE TABBER TO THE WALL RECEPTACLE.
DO NOT USE OUTLETS CONTROLLED BY WALL SWITCHES.
DO NOT USE AN OUTLET THAT SHARES THE SAME CIRCUIT WITH
LARGE ELECTRICAL MACHINES OR APPLIANCES.
T-350 Operations Rev. 3/23/2009 18