Feed rollers and forwarding rollers, Warning, Do not use solvents to clean the rubber rollers – Rena T-350 User Manual
Page 37: Avoid using solvents on the rubber rollers, Media sensor, Do not use abrasives of any kind to clean sensors, Do not use liquids of any kind, to clean sensors
MAINTENANCE
Feed Rollers and Forwarding Rollers
WARNING
DO NOT USE SOLVENTS TO CLEAN THE RUBBER ROLLERS
The feed and forwarding rollers can become glazed with paper lint and ink from the
media. They should be regularly cleaned with a mild household cleaner on a damp cloth.
Avoid using solvents on the rubber rollers.
Media Sensor
WARNING
DO NOT USE ABRASIVES OF ANY KIND TO CLEAN SENSORS.
DO NOT USE LIQUIDS OF ANY KIND, TO CLEAN SENSORS.
Periodically check the media sensor, and the area below the media sensor assembly. The
sensor should be clean and free of accumulated paper dust. Use a vacuum with a soft
brush attachment or dry compressed air to remove the dust.
Direct sunlight and strong over-head lighting may negatively affect the function of the
media sensor. If you are experiencing tabbing problems, relocate the unit to an area that
is not as bright.
T-350 Operations Rev. 3/23/2009
37