Teac DR-100MKII - Manual (Page 8)

8
TASCAM DR-100MKII
8 Press the PLAY/PAUSE [7/9] button for playback.
If you use a headphone or external monitor system
(powered monitor speakers or amplifier and
speakers), connect it to the or LINE OUT jack on the
left side panel.
Powered monitor speakers
or amplifier and speakers
Headphones
For playback over the built-in speaker, turn the
SPEAKER switch to ON (See “Using the built-in
speaker” on page 25.)
NOTE
When headphones are connected, sound will not be
output from the speaker even if the SPEAKER switch is ON.
9 Use the /SP OUTPUT volume control to adjust the
playback volume.
10 Press the STOP [8] button to stop playback.
NOTE
If you have made several recordings, use the . or /
button to select the file to play when playing back or
stopped and the Home Screen is displayed.
11 To turn the power OFF, press and hold the
button on the left side panel until
LINEAR PCM
RECORDER
appears on the screen. When the recorder
is finished shutting down, the power will turn off.
Quick Start Guide