Thinklogical ImageEvolution X3 Manual User Manual
Page 20
Advertising
Revision D
20
June 2011
System Set
The system set menu allows you to view the IP address, Mask and Gateway of the unit in use.
From this menu you can also select either RS-232 or RS-422 as the serial port. You must hit
the “Save/Apply” button to save your changes.
The IP address, Mask, and Gateway can all be changed via RS-232/RS-422 control or via the
front panel only. The fields are read-only on the GUI.
System Info
The system info menu allows you to view information for the inputs and outputs as well as
Genlock and software and firmware versions.
Advertising