Thinklogical ImageEvolution X3 Manual - Manual (Page 25)

Revision D 25 June 2011
MAIN MENU:
D:
Audio Info and Setup
a:
Enable Audio Output
Enables the embedded audio output from the selected input.
b:
Disable Audio Output
Mutes all embedded audio output channels.
c:
Get Audio Info Input 1
Get Audio information from BNC Input 1.
d:
Get Audio Info Input 2
Get Audio information from BNC Input 2.
e: Set Audio Delay
Audio Delay range is from -50 - +50 in mS with the default being 0.
f:
Get Audio Delay
The programmed Audio Delay in mS.
g:
Get Audio Channel Cfg.
Get the audio channel mapping.
h: Assign Audio Channels
Configure input to output channel configuration.