Thinklogical ImageEvolution X3 Manual - Manual (Page 28)

Revision D 28 June 2011
MAIN MENU:
G:
System Information
The following is used for retrieving information regarding current setup and signal
detection information. The 'Get Genlock Info' is not available for display on the Front Panel. The
'Get Input X', 'Get Output Info' will display the signal format only on the Front Panel whereas the
other communications interfaces will display more verbose info.
a: Get Software Version
Displays the System’s software version number.
b: Get FPGA 1 Version
Displays FPGA 1 version number
c: Get FPGA 2 Version
Displays FPGA 2 version number
d: Get Local Temperature
Displays the temperature inside the box
e: Get Input 1 Info
Displays Information about the video and embedded audio signal on BNC Input 1
f: Get Input 2 Info
Displays Information about the video and embedded audio signal on BNC Input 2
g: Get Output Info
Displays Information about the video and embedded audio signal on BNC
Outputs
h:
Get Genlock Info
Displays Information about the incoming Genlock signal on BNC Genlock Input