Verilink PRISM 4101 (34-00230) Product Manual - Manual (Page 13)

The PRISM 4101 provides the ideal solution for remote DDS branch access to the
LAN, video or any other data application. It provides full access to configuration,
status, and diagnostic features through either a front panel LCD interface or a
software driven terminal interface. The terminal interface is accessable via a SLIP,
Ethernet, or Token Ring connection from a wide area network host.
The PRISM 4101 is an advanced CSU/DSU with an embedded SNMP agent and
telnet capabilities that can be connected directly to the LAN. The SNMP agent
allows the unit to function like any other native LAN element. The agent supports
MIB-II and DDS MIBs providing information specific to unit operation. The
TCP/IP connection may be accessed through the standard SLIP interface or
through the optional Ethernet or Token Ring interface.
The unit provides a managed interface into standard DDS service. It supports
synchronous data rates from 2.4 to 64 kbps and asynchronous data rates from 2.4
to 57.6 kbps. The rate adaptation feature allows slower rate customer equipment to
be transmitted over 56 or 64 kbps lines. The DTE supports both V.35 and RS-232
interfaces. External clocking is supported for use in tail circuit applications.
The PRISM 4101 has diagnostic features allowing quick and easy trouble isolation.
The unit responds to all standard loop codes from the telco and can initiate remote
V.54 loopbacks. An internal BERT may be used for testing. Line conditions are
monitored and reported through the front panel interface, a user connection to the
terminal interface, a telnet connection, or through SNMP.
SCROLL
EXIT
SELECT BACKUP
TEST
ALARM
POWER
PRISM
4101
T R A N S P O R T
®
Figure 1-1 PRISM 4101
1
G
ENERAL