Verilink PRISM 4101 (34-00230) Product Manual - Manual (Page 54)

42 C HAPTER 4: T ERMINAL I NTERFACE
TCP/IP Configuration
The TCP/IP Configuration screen (Figure 4-11) is accessible for the SLIP, Ethernet
or Token Ring SNMP interface. Required parameters are entered for proper
operation with an Ethernet, SLIP or Token Ring based LAN manager.
Figure 4-11 TCP/IP Configuration Screen
Reset LAN Interface. For changes to unit IP, router IP, subnet mask, and LAN
connection to take effect, the unit must be restarted. Pressing Return on this field
brings up a confirmation screen which asks whether or not to proceed with the
reset.
Selecting this command will disrupt data service.
LAN Connection. This field allows you to toggle the different types of interfaces
available. The choices are SLIP, Ethernet, and Token Ring. An additonal field for
entering desired speed appears next to the LAN connection field when SLIP or
Token Ring is selected.
SLIP - The choices are 1.2, 2.4, 9.6, 19.2 kbps.
Token Ring - The choices are 4 and 16 Mbps.
PRISM IP Address. This field accepts IP addresses. Each device connected to the
LAN is required to have a unique IP address identifier. This field contains four
3-digit numbers (or octets) separated by periods. The range of each octet is 0 to
255.
Subnet Mask. This field allows you to manually override the subnet mask setting
which is otherwise discovered by the SNMP agent. This field contains four 3-digit
numbers (or octets) separated by periods. The range of each octet is 0 to 255.