Unit ip address, Router ip address, Subnet mask – Verilink PRISM 4101 (34-00230) Product Manual User Manual
Page 31: Filter ip address, Trap ip address, Sets, Read community, Unit ip address router ip address subnet mask
Main Menu
19
The SNMP menu consists of alpha-numeric entry only (no selectable parameters).
The following three menu items use the format shown in the IP Address screen.
Each number has a range from 0 to 255 and is separated by a period.
Figure 3-12 Example IP Address
Unit IP Address
Accepts IP addresses. Each device connected to the LAN is required to have a
unique IP address identifier.
Router IP Address
Accepts the IP address of a default router, if one is present.
Subnet Mask
Provided to manually override the subnet mask setting which is otherwise
discovered by the SNMP agent.
Filter IP Address
Accept the IP address of the source packet filter. If any of these fields are set,
access is allowed only by the specified IP addresses.
Trap IP Address
Accepts the IP address of a network device where alarm reporting traps are to be
sent. The unit detects and reports alarms and provides several options for reporting
them, one of which is SNMP traps. When a network alarm occurs, the unit sends a
trap message to up to six destinations on the user’s network.
Sets
Enables or disables the SET commands. If this field is set to No, the SNMP
manager wil be unable to change the unit’s configuration. Refer to Appendix A for
detailed information on these responses.
The following five menu items use the format shown in the System Edit screen.
The top line in each screen accepts a string of up to 58 characters which identifies
the appropriate group, person, device function, or unit location.
Figure 3-13 System Edit
Read Community
Accepts a character string identifying the group authorized to perform read
operations. The default setting is public.
>
132.016.232.000
Read Community
>public