Visara FEP-4600 - Manual (Page 50)

Chapter 3. Administrative Interface
3-28 707118-001
Hard Drive Status
The FEP-4600 uses RAID 1 mirroring of the drives (data written to one drive is
automatically written to the other) to insure integrity of the data on the system. You can
view the status of the hard drives by selecting the ‘RAID’ option from the menu at the
top of most panels.
The resulting panel will display:
There are three partitions on each drive (Boot, Root, and Swap). The RAID Status
indicates the current state of each partition on each drive. An individual partition can be
reset to insure proper operation.