Visara FEP-4600 - Manual (Page 78)

Chapter 6. Maintenance
6-14 707118-001
Installing a new fan: (2 each 8 cm. Fans)
Replace the failed fan with an identical 8-cm, 12 volt fan (Visara p/n
53925-001).
1. Position the new fan at its proper place in the chassis by fitting the
fan with its housing onto the fan mounts in the chassis.
2. A “click” can be heard if the fan (in its housing) is properly
installed. If the system power is on, the hot-pluggable fan feature
will cause the fan to start immediately upon being connected to its
header on the motherboard.