Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 18)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 18 -
configuration page.
• IP Subnet Mask: The SIPPBX 6200x server IP Subnet Mask at LAN port.
Default is 255.255.0.0.
Figure 3.1-7
System Setup Wizard
After completing the initial setup, you need to setup the basic parameters for this
IP-PBX system. For example, UDP port, Enable the Encryption or not, and so on.
Here is the second step required after initial setup wizard.
Start Path: Home >System Setup Wizard
Step 1: System Setup Basic Parameters. SIPPBX 6200x can support up-to 3
UDP/TCP ports. If you are using voice gateway mode, please make
sure you have connected both WAN and LAN Ethernet ports.