H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 112)

9-8
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon statistics 1 owner user1-rmon
[Sysname-GigabitEthernet1/0/1] quit
After the above configuration, the system gathers statistics on packets received on GigabitEthernet
1/0/1. You can view the statistics in any of the following ways:
z View the statistics of the interface with the display command.
<Sysname> display rmon statistics gigabitethernet 1/0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet1/0/1<ifIndex.3>
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
z Obtain the value of the MIB node directly by executing the SNMP Get operation on the NMS
through software.
History Group Configuration Example
Network requirements
As shown in Figure 9-2 , Agent is connected to a configuration terminal through its console port and to
Server through Ethernet cables.
Gather statistics on received packets on GigabitEthernet 1/0/1 every one minute through RMON history
statistics table, and thus the administrator can view whether data burst happens on the interface in a
short time.
Figure 9-2 Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface GigabitEthernet 1/0/1 periodically.
<Sysname> system-view