H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 58)

4-30
Volume Module Command WX3024 WX3010 WX3008
display qos map-table Yes Yes Yes
display qos lr interface No No No
if-match
classifier tcl-name not
supported
inbound-interface
interface-type
interface-number not
supported
IPv6 ACL not supported
rtp start-port
start-port-number
end-port end-port-number
not supported
classifier tcl-name not
supported
inbound-interface
interface-type
interface-number not
supported
local-precedence
local-precedence-list not
supported
IPv6 ACL not supported
rtp start-port
start-port-number
end-port end-port-number
not supported
classifier tcl-name not
supported
inbound-interface
interface-type
interface-number not
supported
local-precedence
local-precedence-list not
supported
IPv6 ACL not supported
rtp start-port
start-port-number
end-port end-port-number
not supported
qos pql inbound-interface No No No
qos pql protocol No No No
qos cql inbound-interface No No No
qos cql protocol No No No
qos car Yes Yes Yes
qos lr No No No
qos map-table Yes Yes Yes
redirect Yes Yes Yes
Congestion management
configuration commands
No No No
AAA commands nas device-id device-id No No No Security Command
Reference
802.1X commands dot1x max-user
user-number ranges from 1
to 2048. user-number ranges from 1
to 2048. user-number ranges from 1
to 2048.