H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 46)

4-18
Volume Module Command WX6103 LSQM1WCMB0 LSBM1WCM2A0 LSRM1WCM2A1
loopback Yes Yes Yes Yes
loopback-detection
control enable
Yes Yes Yes Yes
loopback-detection
enable
Yes Yes Yes Yes
loopback-detection
interval-time
Yes Yes Yes Yes
shutdown Yes Yes Yes Yes
speed Yes No Yes No
VLAN commands
interface
vlan-interface The maximum value
is 1024. The maximum value
is 1024. The maximum value
is 1024. The maximum value
is 1024.
MAC address table
management
commands
mac-address
max-mac-count count ranges from 0
to 24576. count ranges from 0
to 24576. count ranges from 0
to 24576. count ranges from 0
to 24576.
Link aggregation
commands
All commands No No No No
MSTP commands All commands No No No No
Layer 2 forwarding
commands
All commands No No No No
Port mirroring
commands
All commands No No No No
pppoe-server
max-sessions
local-mac
number ranges from
1 to 20480. number ranges from
1 to 20480. number ranges from
1 to 20480. number ranges from
1 to 20480.
Layer 2 – WAN
Command Reference
PPP commands
pppoe-server
max-sessions total
number ranges from
1 to 65535 and
defaults to 4096. number ranges from
1 to 65535 and
defaults to 4096. number ranges from
1 to 65535 and
defaults to 4096. number ranges from
1 to 65535 and
defaults to 4096.
ARP commands
arp
max-learning-num number ranges from
0 to 24576. number ranges from
0 to 24576. number ranges from
0 to 24576. number ranges from
0 to 24576. Layer 3 – IP Services
Command Reference
DNS commands
All commands for IPv6
DNS configuration
Yes Yes No Yes