H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 155)

11-20
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view nqa entry admin-name operation-tag —
Enter test type view of the test
group type { dhcp | dns | ftp | http | icmp-echo | snmp
| tcp | udp-echo | udp-jitter | voice }
—
Configure to send traps to the
network management server under
specified conditions reaction trap { probe-failure
consecutive-probe-failures | test-complete |
test-failure cumulate-probe-failures }
Required
No traps are sent to
the network
management server
by default.
z NQA DNS tests do not support the action of sending trap messages. The action to be triggered in
DNS tests can only be the default one, none.
z Only the test-complete keyword is supported for the reaction trap command in a voice test.
Configuring the NQA Statistics Collection Function
NQA groups tests completed in a time period for a test group, and calculates the test result statistics.
The statistics form a statistics group. To view information about the statistics groups, use the display
nqa statistics command. To set the interval for collecting statistics, use the statistics interval
command.
When the number of statistics groups kept reaches the upper limit and a new statistics group is to be
saved, the earliest statistics group is deleted. To set the maximum number of statistics groups that can
be kept, use the statistics max-group command.
A statistics group is formed after the last test is completed within the specified interval. When its hold
time expires, the statistics group is deleted. To set the hold time of statistics groups for a test group, use
the statistics hold-time command.
Follow these steps to configure the NQA statistics collection function:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Enter test type view of the test
group
type { dns | ftp | http | icmp-echo |
snmp | tcp | udp-echo | udp-jitter
| voice }
—
Configure the interval for collecting
the statistics of test results
statistics interval interval
Optional
60 minutes by default.
Configure the maximum number of
statistics groups that can be kept
statistics max-group number
Optional
2 by default.
To disable collecting NQA
statistics, set the maximum
number to 0.