HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 415)

01.98
TNC 407/TNC 415/TNC 425 3 List of machine parameters 5-13
Machine
parameter Function and input Change
via Reaction Page
MP950 Datum point for positioning blocks with M92
Entry:
–99 999.9999 to +99 999.9999 [mm] or [°]
Values referenced to machine datum
MP950.0 X axis
MP950.1 Y axis
MP950.2 Z axis
MP950.3 4th axis
MP950.4 5th axis
PLC RUN 4-127
MP951 Simulated toolchange position for TOOL CALL with
block scan:
–99 999.9999 to +99 999.9999 [mm] or [°]
Values referenced to machine datum
MP951.0 X axis
MP951.1 Y axis
MP951.2 Z axis
MP951.3 4th axis
MP951.4 5th axis
PLC RUN 4-149
MP960 Machine datum
Entry:
–99 999.9999 to +99 999.9999 [mm] or [°]
MP960.0 X axis
MP960.1 Y axis
MP960.2 Z axis
MP960.3 4th axis
MP960.4 5th axis
PLC EDIT REF 4-127
3.2 Positioning
Machine
parameter Function and input Change
via Reaction Page
MP1010 Rapid traverse
Entry: 10 to 300 000 [mm/min]
MP1010.0 X axis
MP1010.1 Y axis
MP1010.2 Z axis
MP1010.3 4th axis
MP1010.4 5th axis
PLC EDIT 4-70