HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 458)

01.98
TNC 407/TNC 415/TNC 425 61 List of markers 6-9
Marker Function Set Reset Page
M3170 MODULO wrongly executed NC PLC 7-70
7-86
7-123
M3171 Error status for PLC modules NC PLC
NC 7-123
7-136ff.
M3172 Reserved for errors, which the PLC programmer would like to
trap PLC PLC 7-123
M3200
to
M3263 Values from MP4310.3 to MP4310.6 7-179