HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 463)

7-2
TNC 407/TNC 415/TNC 425 01.98
3.1.12 ASSIGN TWO'S COMPLEMENT (= -) 7-46
3.2 Set-Commands 7-48
3.2.1 SET (S) 7-48
3.2.2 RESET (R) 7-49
3.2.3 SET NOT (SN) 7-50
3.2.4 RESET NOT (RN) 7-51
3.3 Logic Gates 7-53
3.3.1 AND (A) 7-53
3.3.2 AND NOT (AN) 7-55
3.3.3 OR (O) 7-57
3.3.4 OR NOT (ON) 7-59
3.3.5 EXCLUSIVE OR (XO) 7-61
3.3.6 EXCLUSIVE OR NOT (XON) 7-63
3.4 Arithmetic Commands 7 7-66
3.4.1 ADDITION (+) 7-66
3.4.2 SUBTRACTION (–) 7-67
3.4.3 MULTIPLICATION (x) 7-68
3.4.4 DIVISION (/) 7-69
3.4.5 REMAINDER (MOD) 7-70
3.4.6 INCREMENT (INC) 7-71
3.4.7 DECREMENT (DEC) 7-71
3.5 Comparisons 7-73
3.5.1 EQUAL TO (==) 7-73
3.5.2 LESS THAN (<) 7-74
3.5.3 GREATER THAN (>) 7-75
3.5.4 LESS THAN OR EQUAL TO (<=) 7-76
3.5.5 GREATER THAN OR EQUAL TO (>=) 7-77
3.5.6 UNEQUAL (<>) 7-78
3.6 Parentheses with logical gating 7-80
3.6.1 AND [ ] (A[ ]) 7-80
3.6.2 AND NOT [ ] (AN[ ]) 7-80
3.6.3 OR [ ] (O[ ]) 7-80
3.6.4 OR NOT [ ] (ON[ ]) 7-80
3.6.5 EXCLUSIVE OR [ ] (XO[ ]) 7-81
3.6.6 EXCLUSIVE OR NOT [ ] (XON[ ]) 7-81
3.7 Parentheses with arithmetic Commands 7-85
3.7.1 ADD [ ] (+[ ]) 7-85
3.7.2 SUBTRACT [ ] (–[ ]) 7-85
3.7.3 MULTIPLICATION [ ] (x[ ]) 7-85
3.7.4 DIVISION [ ] (/[ ]) 7-85
3.7.5 REMAINDER [ ] (MOD[ ]) 7-86
3.8 Parentheses with comparison Commands 7-89
3.8.1 EQUAL TO [ ] (==[ ]) 7-89