HEIDENHAIN TNC 407 (243 020) Technical Manual - Manual (Page 422)

5-20
TNC 407/TNC 415/TNC 425 3 List of machine parameters 01.98
3.5 Digital speed control (only TNC 425)
Machine
parameter Function and input Change
via Reaction Page
MP1900 Select axes with digital speed controller
Entry: %xxxxx 11-8
MP1910 Speed controller monitoring
Entry: 1 to 16 777 215
MP1910.0 X axis
MP1910.1 Y axis
MP1910.2 Z axis
MP1910.3 4th axis
MP1910.4 5th axis
11-9
MP1920 Integral component for speed controller
Entry: 0 to 65 535
MP1920.0 X axis
MP1920.1 Y axis
MP1920.2 Z axis
MP1920.3 4th axis
MP1920.4 5th axis
11-9
MP1925 Limiting the integral component for speed
controller
Entry: 0.000 to 65.535 [s]
Suggested value: 0.1 to 2 s
MP1925.0 X axis
MP1925.1 Y axis
MP1925.2 Z axis
MP1925.3 4th axis
MP1925.4 5th axis
11-9
MP1940 Proportional component for speed controller
Entry: 0 to 65 535
MP1940.0 X axis
MP1940.1 Y axis
MP1940.2 Z axis
MP1940.3 4th axis
MP1940.4 5th axis
11-9
MP1945 Factor for acceleration precontrol of the rotational
speed controller
Entry: 0.000 to 9.999 [V/(m/s
2 )]
MP1945.0 X axis
MP1945.1 Y axis
MP1945.2 Z axis
MP1945.3 4th axis
MP1945.4 5th axis
11-9