5 installation procedure – Yaskawa 1000 Series Drive Option - MECHATROLINK-II Installation User Manual
Page 18
Advertising
5 Installation Procedure
18
YASKAWA ELECTRIC
TOBP C730600 50C YASKAWA 1000-Series Option SI-T3 Installation Manual
2.
With the front covers and digital operator removed, apply the LED label (E) in the
appropriate position on the unit top front cover (C).
Figure 4
Figure 4 Apply the LED Label
3.
Insert the option (B) into the
CN5-A connector (L) located on the unit and fasten it
using one of the included screws (H).
Figure 5
Figure 5 Insert the Option
TX
RX
ERR
RUN
C
E
NS M
S
L
H
B
Advertising
This manual is related to the following products: