Yaskawa AC Servo Drives Sigma II Series DeviceNet - Manual (Page 7)

E-4
SYMBOLS FOR SAFE OPERATION
In this manual, the NOTES FOR SAFE OPERATION are classified as “WARNING” or
“CAUTION”. The following symbols are used.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious personal injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate personal injury and/or damage to the equipment.
In some instances, items described in may also result in a serious accident. In
either case, follow these important items.
NOTES FOR SAFE OPERATION
Read this manual thoroughly before installation, operation, maintenance or inspection of the
AC Servo Drives.
„ CHECKING ON DELIVERY
„ STORAGE AND TRANSPORTATION
WARNING
CAUTION
CAUTION
(Ref.No.)
• When SGDH SERVOPACK is used with an NS300 Module mounted, the parame-
ters are automatically set so that the NS300 Module can be operated from the first
power ON.
For details of parameter setting methods, refer to Σ-II Series SGM /SGDH User’s Manual
(SIEPS80000005).
E-9
CAUTION
• If disinfectants or insecticides must be used to treat packing materials such as wooden frames,
pallets, or plywood, the packing materials must be treated before the product is packaged, and
methods other than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core temperature of
56
°C for 30 minutes or more.
If the electronic products, which include stand-alone products and products installed in machines, are
packed with fumigated wooden materials, the electrical components may be greatly damaged by the
gases or fumes resulting from the fumigation process. In particular, disinfectants containing halogen,
which includes chlorine, fluorine, bromine, or iodine can contribute to the erosion of the capacitors.
CAUTION