Yaskawa E7 Drive Technical Manual - Manual (Page 29)

Date: 02/25/2010, Rev: 10-02 Page 29 of 34 TM.F7SW.064
In Alignment (Digital Output) Function , no offset (P4-03 = 0.00 revs)
(P4-04 = 4096 cts)
Follower Run Input
Master Trig Input
Follower Trig Input
P4-04 P4-04 P4-04 P4-04 P4-04
In Alignment Digital Output
In Alignment (Digital Output) Function , w/offset (P4-03 = +3.00 revs)
(P4-04 = 4096 cts)
Follower Run Input
Master Trig Input
Follower Trig Input
In Alignment Digital Output
P4-03
P4-04
P4-03
P4-04
P4-03
P4-04
P4-03
P4-04