Power supply check (24v), Gpd 506/p5 – Yaskawa GPD 506/P5 Section Two User Manual
Page 13
Advertising
PP.P5G5.02Troubleshoot
Page 13
Rev. 06/11/2003
Power Supply Check (24V)
Step 6 (For GPD 506/P5 models)
Measure the isolated 24V power supply on the control board at
terminals S1 ~ S6 using terminal SC (Gnd) as a common point.
DC
Volt
Meter
-
+
24V
S1 S2 S3
S4 S5 S6
SC SC
FS FC
ETC61502X-SXXXX
GPD 506/P5
Advertising
This manual is related to the following products: