Remove dc bus fuse(s) – Yaskawa GPD 506/P5 Section Two User Manual
Page 6
Advertising
PP.P5G5.02Troubleshoot
Page 6
Rev. 06/11/2003
Remove DC Bus Fuse(s)
for models 2030 through 2075 and 4055 through 4160
Step 1
Remove the DC bus fuse(s) and replace with a 30 watt 1 k ohm
resistor.
Resistor assembly.....
30 watt 1k ohm
No. 12 AWG wire (stranded)
Alligator Clips (large size)
Small enclosure*
* In case of a short, the enclosure will contain the resistor if it fragments.
M
L1
L2
L3
(+)
(-)
T1
T2
T3
Advertising
This manual is related to the following products: