Remove dc bus fuse – Yaskawa GPD 506/P5 Section Two User Manual
Page 5
Advertising
PP.P5G5.02Troubleshoot
Page 5
Rev. 06/11/2003
Remove DC Bus Fuse
Step 1
Remove the DC bus fuse and replace it with a 30 watt 500 ohm
resistor.
Resistor assembly.....
30 watt 500 ohm
No. 12 AWG wire (stranded)
Alligator Clips (large size)
Small enclosure*
* In case of a short, the
enclosure will contain the
resistor if it fragments.
M
T3
T2
T1
L1
L2
L3
(+)
(-)
Advertising
This manual is related to the following products: