LinPlug MorphoX - Manual (Page 12)

Oscillators
The LinPlug MorphoX contains 2 oscillators plus a noise source. The
oscillators are similar, but not identical.
Common to both oscillators
The LinPlug MorphoX's oscillators' outputs a waveform that is a
combination of two basic waveforms. These waveforms are constructed
from harmonic sine waves using a unique additive process which ensures a
smooth, high quality output signal.
The type of waveform is set by clicking on one of the Wave names below
the Waveform Display. This opens a menu that allows you to select from
the available waveforms. With the arrow keys next to the wave name you
can switch through all available waveforms one by one (good for checking
while playing). Right of the name you have the option to set the Octave
setting for a waveform in the range -2 to +2 octaves, just drag it up or down
to adjust the pitch in one octave steps.
The combined output waveform is shown in the Waveform Display.
MorphoX user manual 1.1.0 page 12