LinPlug MorphoX - Manual (Page 33)

Preset Browser / File Controls
The Preset Display consists of two displays. The left one shows the current
Bank and the right one shows the current Preset. Whenever a Preset is
loaded the Preset name is updated with the name of the loaded Preset and
the Bank name (that's the name of the directory that contains the Preset).
In this example, the bank is the “demo presets” bank and its the preset
named “overtechnical” from Jan Ancic.
By default the Preset Browser points to the factory presets installed with the
LinPlug MorphoX. The location of the library can be adjusted on the options
page.
Presets can be changed in three different ways.
1. You can select the desired Preset directly from the right display, which
turns into a full screen file menu when you click on it.
2. You can switch to the previous or next preset in the bank by clicking the
< (Previous) or > (Next) arrow buttons located right of the Preset name.
3. You can also change a Preset by sending a program change command
from your host to the synth (could be either a built in feature of the host or a
MIDI program change from your MIDI controller).
The Bank can be changed by clicking the bank name and choosing the
desired bank from the appearing menu.
The Save button allows you to save the current settings as a new Preset.
Note that when you load a Preset the previous Preset is erased so if you
want to keep changes in a Preset, make sure you save it before loading
another one.
Voice Limit
The Voices control is used to set the polyphony available. The maximum
polyphony is 32 voices. A variety of settings are available for polyphony:
"mono", "2" to "12" and "oo".
MorphoX user manual 1.1.0 page 33