LinPlug MorphoX - Manual (Page 7)

Overview
The LinPlug MorphoX is a 32 note-polyphonic virtual subtractive-style
synthesizer, combining various oscillators, a special filter module, many
modulation and effects modules with its real time morphing capability.
The block diagram below shows the signal flow within the LinPlug MorphoX
synthesizer:
The shadow behind each module indicates that there are two complete
independent settings for all these modules, the sub-programs A and B
(actually there are even more modules morphing, in example all the LFO's
and Envelopes, but this is only audio signal flow).
Audio signals are generated by the oscillators who gets pitch information
from the host software. MorphoX receives its MIDI data on all Channels
simultaneously (Omni mode).
The LinPlug MorphoX has two oscillators plus a noise oscillator. Each
oscillator's pitch, amplitude, panning and more can be controlled using the
Modulation Matrix. Oscillator 2 is followed by a Ringmodulator which is also
feed from Oscillator 1.
The output of all of the oscillators and Ringmodulator is routed to the Filter.
The Filter modifies the frequency spectrum of the oscillator's output. The
MorphoX user manual 1.1.0 page 7