LinPlug MorphoX - Manual (Page 24)

Appendix A for a complete listing and description of all modulation sources
and destinations).
Modulation sources are shown in a column on the left of the display, while
the destinations are shown on the right. The modulation amount is
displayed in the middle. To change a routing click on the source or
destination that you want to change. A menu will appear which lets you
select the new source or destination. To remove a modulation source or
destination select the "- - - - -" entry in the menu.
To change the modulation depth click on the amount display and move the
mouse (while keeping the mouse button pressed) upwards or downwards
(increasing or decreasing the value) until the desired amount has been
reached. The further you move the mouse, the less sensitive it gets,
allowing more drastic changes.
A negative modulation depth inverts the waveform of the modulation
source. Double-clicking on a modulation depth display sets the value to
0.00 (disabled). Double-clicking again on the display restores the previous
value. This can be useful when creating new Presets to quickly disable
modulation routings.
The modulation of pitch has a special display for modulation depth. In
example a modulation depth of "2:50" means that the respective pitch is
modulated to a depth of 2 semitones and 50 cents.
Modulation Envelope
The Modulation Envelope is a general purpose envelope, used as
Modulation Source in the Modulation Matrix. See chapter Modulation Matrix
right before this chapter for more info on the matrix and chapter ADSR
Envelopes for more info about ADSR envelopes.
MorphoX user manual 1.1.0 page 24