Rugged Cams Rugged Vision DVR - Manual (Page 60)

REMOTE VIEW
Gain remote access to the
DVR Server by installing the
Remote Client on the PC that
you wish to have remote
connection to the DVR.
downloadable installer
available at:
http://dvr.neugent.net/downloads/
main_software.php
60
1. Remote View - Displays the remote live view. 15. Auto-Enhance – Automatically enhances the
image quality of the videos displayed. However,
turning this on increases the CPU usage of the PC.
2. Client Setup – Opens the Client Setup window. 16. FPS and KBps – When connected the number
bytes received as well as the FPS received and
displayed are shown.
3. DVR Setup – Opens the DVR Server Setup
window. 17. Video Event Log – Displays recent event logs.
4. Search and Playback– Opens the Search and
Playback window. 18. Audio – Displays audio devices.
5. Emap – Opens the Emap window. 19. Sensors – Displays sensor devices.
6. Date and Time - Displays date and time of DVR
Server. 20. Relays – Displays relay devices.
7. DVRs – Displays list of available DVR connections.
Once connected it shows the list of cameras for the
DVR server. Left-clicking on a camera displays the
selected camera and sets the layout to 1-camera. 21. Image Control – Controls to adjust Brightness,
Contrast, Hue and Saturation.
8. Connect/Disconnect button – Connect or
disconnects to the selected DVR Server 22. DVR Selection – Selects the active DVR when in
group mode. The relay and sensor display will depend
on the active server selected in this dropdown.
9. PTZ Function – Shows functions for PTZ control 23. Talk – Click and hold to enable 2-way
communication with server. A microphone must be
attached and the MIC boost option turned off. To talk,
click and hold the button. Audio playback will be
paused during this period. Once released, audio
playback will be continued. To hear the audio from
the server, the appropriate audio channel must be
selected.
10. Screen Layout – Changes the screen layout of the
live view. 24. Record – Starts forced or manual recording.
11. Next Camera – Displays video of next camera or
cameras. (For instance, if screen layout is at
4-camera layout, the next 4 cameras will be displayed
upon pressing this button.) 25. Mute – Mutes/Unmutes the alarm sound.
12. Cyclic Screen – Displays videos in sequence. The
cycle will follow the layout currently displayed and will
skip those layouts that only show disabled cameras. 26. Help – Opens the Help window.
13. Full screen – Displays current layout of cameras in
full screen. 27. Minimize – Minimizes the Remote Client
application.
14. Screen Capture/Snapshot button – Takes a
snapshot of the image displayed on-screen. 28. Close – Closes the Remote Client application.