Rugged Cams Rugged Vision DVR - Manual (Page 83)

Recording Schedule
1. Camera – Displays a drop down list menu listing all cameras. Choose “All” to update all
cameras with the same settings.
2. Recording Schedule grid – Displays the complete recording schedule.
3. Recording Type menu – After selecting a time period, this menu will appear where the user
can select what type of recording will be assigned to the selected time period. Possible recording options
are Sensor, Motion, Event, Continuous or No Recording.
4. Restore Defaults – Restores the default settings.
5. Apply – Saves the settings.
Set Recording Schedule
1. To set recording schedules, first select the camera desired by choosing from the Camera drop
down list menu. Choosing the Camera All option will allow the settings to apply to all cameras.
2. Click and drag the mouse pointer over the grid to select the area to schedule for recording.
Once you release the mouse pointer, a menu will appear, indicating the recording options: S – Sensor,
M – Motion, E – Event = Sensor and Motion, C – Continuous, X – No Recording or Cancel to cancel the
selection. When the recording is set to sensor, then only sensor triggered events are recorded. When
motion recording is set, only motion detected events are recorded. Event recordings allow for both
motion, sensor and object detection events. However, if all of these events are triggered, sensor
recording takes priority, then motion. Continuous recording simply sets the camera to record all the time
but should a sensor or motion event be triggered, the recording will be changed according to the event
type triggered.
3. To apply settings, click on the Apply button.
83