Rugged Cams Rugged Vision DVR - Manual (Page 74)

The DVR Remote Server Setup for Embedded
DVRs can be accessed through the Remote
Client application.
NOTE: Use of the DVR Setup function is only allowed if
current user’s Login ID is authorized for this function.
User Login
1. Enter the username and password.
2. Click on the Login button or press ENTER to login. Click on the X button to exit.
NOTE: The factory default for username is “Admin” and for password is “5678” respectively. You can change the de-
fault username and password once you are logged in.
REMOTE SERVER SETUP
Setup Menu Options
The server setup is divided into several sections each with it’s own sub-menu.
Camera Event
This section contains the setup for the camera
settings - labels, Frames Per Second (FPS),
video size, video quality, buffers and audio
quality. This section contains the setup for sensor and
relay related settings - sensor-relay mappings,
sensor-camera mappings, sensor-ptz
mappings, motion-relay mappings and alarm
notification details on these events.
PTZ Schedules
This section contains setup information on PTZ
cameras - protocols and general communication
settings. This section contains the setup for video
recording schedules.
System Close
This section contains a variety of settings - Initial
overlay screen, video signal, DDNS settings,
network configuration and user setup. The X on the upper right-hand area of the menu
is the close button for the DVR server setup.
Only upon clicking this button will the DVR
server reload the changes in the settings that
have been applied in the setup.
74